Compilation of VCL under XE3

TeeChart VCL for Borland/CodeGear/Embarcadero RAD Studio, Delphi and C++ Builder.
Lesley
Newbie
Newbie
Posts: 3
Joined: Tue May 15, 2012 12:00 am

Compilation of VCL under XE3

Post by Lesley » Wed Sep 05, 2012 3:39 pm

XE3 is officially avalaible. I've just bought it and tried to compile TeeChartPro for VCL manually, based on the project group without installing TeeChart Standard before with XE3. First in the inc file there are no corresponding definitions for XE3. I extended it. There are a lot of errors during opening the packages. (Class TButtonPen, TButtonColor etc. not defined...)
Did anybody tried it to manually compile and install TeeChart Pro?

Thanks:
Lesley

Yeray
Site Admin
Site Admin
Posts: 8778
Joined: Tue Dec 05, 2006 12:00 am
Location: Girona, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Yeray » Thu Sep 06, 2012 7:48 am

Hi Lesley,

We've got to do a significant amount of changes for the Standard version to be shipped into XE3.
That's why I don't think it will be easy to make TeeChart v2012.06 (or any before) compile for XE3.
I'd suggest you to wait until we publish a Pro version (presumably v2012.07) supporting it.
Best Regards,
ImageYeray Alonso
Development & Support
Steema Software
Av. Montilivi 33, 17003 Girona, Catalonia (SP)
Image Image Image Image Image Image Please read our Bug Fixing Policy

Lesley
Newbie
Newbie
Posts: 3
Joined: Tue May 15, 2012 12:00 am

Re: Compilation of VCL under XE3

Post by Lesley » Thu Sep 06, 2012 8:18 am

Thanks for the fast answer. When do You plan to publish it? I assume, that the VCL part doesn't request such lot modifications. It's were usefull to publish separately for users using VCL, not FM.

Yeray
Site Admin
Site Admin
Posts: 8778
Joined: Tue Dec 05, 2006 12:00 am
Location: Girona, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Yeray » Thu Sep 06, 2012 8:30 am

Hi Lesley,

I can't tell you a date for it, but we are working to achieve it as soon as possible.
I'm afraid we don't have plans to release any TeeChart VCL-only / not-FMX version at the moment.

Since you are a source code customer, if you don't want to wait, we could prepare an "experimental" source code installer for you.
Best Regards,
ImageYeray Alonso
Development & Support
Steema Software
Av. Montilivi 33, 17003 Girona, Catalonia (SP)
Image Image Image Image Image Image Please read our Bug Fixing Policy

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Thu Sep 06, 2012 8:57 am

Hi Lesley,

Just sent an email to the forums profile address with the URL to download the test source code installer Yeray told you.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Lesley
Newbie
Newbie
Posts: 3
Joined: Tue May 15, 2012 12:00 am

Re: Compilation of VCL under XE3

Post by Lesley » Thu Sep 06, 2012 5:03 pm

Thanks for Your assistance! With a little modifications it (the compilation at least) works under XE3 for VCL:
1. These 2 files are to take from the official Juni version: VCLTee.TeeChartPro.pas and VCLTee.Bind.DBLinks.pas. Otherwise I get compilation errors.
2. I used the project file DclTeePro916.dpk. Here were 2 units to expand with the "prefix" VCLTee.

Could You check it?

Best regards and thanks again for the fast help:

Lesley

Jeff Wilhite
Newbie
Newbie
Posts: 1
Joined: Wed Feb 22, 2012 12:00 am

Re: Compilation of VCL under XE3

Post by Jeff Wilhite » Fri Sep 07, 2012 5:21 pm

So, could I get an experimental source code installer, too? Thanks.

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Mon Sep 10, 2012 7:38 am

Hi Jeff,

Sure, just sent it.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Elis AS
Newbie
Newbie
Posts: 1
Joined: Mon Dec 13, 2010 12:00 am
Contact:

Re: Compilation of VCL under XE3

Post by Elis AS » Wed Sep 12, 2012 7:13 am

Hi!

Could you please send me the experimental installer also?

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Wed Sep 12, 2012 8:08 am

Hello,

Yes. I sent it to your forums email address.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Wed Sep 12, 2012 2:42 pm

Hi Lesley,
Lesley wrote:Thanks for Your assistance! With a little modifications it (the compilation at least) works under XE3 for VCL:
1. These 2 files are to take from the official Juni version: VCLTee.TeeChartPro.pas and VCLTee.Bind.DBLinks.pas. Otherwise I get compilation errors.
2. I used the project file DclTeePro916.dpk. Here were 2 units to expand with the "prefix" VCLTee.
Thanks for your feedback. We are getting some different errors here with our current sources as well. We had to work on the Standard version shipped with XE3 until the very last minute so the Pro version is still not ready yet.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Thu Sep 13, 2012 8:06 am

Hello everyone,

I posted a new test source code installer at the same location. Sources now compile and install correctly in XE3. You may need to disable the "Tee 3D" checkbox.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Nev
Newbie
Newbie
Posts: 1
Joined: Thu Sep 13, 2012 12:00 am

Re: Compilation of VCL under XE3

Post by Nev » Fri Sep 14, 2012 1:50 am

I have attempted to install 2012 pro src in XE3. No luck. Where have you posted the updated installer?

NH

Yeray
Site Admin
Site Admin
Posts: 8778
Joined: Tue Dec 05, 2006 12:00 am
Location: Girona, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Yeray » Fri Sep 14, 2012 8:13 am

Hi,

We are preparing a Pre-Release SourceCode installer. As soon as we'll finish some tests with it, we'll make it available through the download area, only for source code customers.
Best Regards,
ImageYeray Alonso
Development & Support
Steema Software
Av. Montilivi 33, 17003 Girona, Catalonia (SP)
Image Image Image Image Image Image Please read our Bug Fixing Policy

Narcís
Site Admin
Site Admin
Posts: 14730
Joined: Mon Jun 09, 2003 4:00 am
Location: Banyoles, Catalonia
Contact:

Re: Compilation of VCL under XE3

Post by Narcís » Fri Sep 14, 2012 9:05 am

Hello everyone,

An updated pre-release source code installer has been just posted at the client area for TeeChart Pro source code customers. For more information on the announcement please read this thread.
Best Regards,
Narcís Calvet / Development & Support
Steema Software
Avinguda Montilivi 33, 17003 Girona, Catalonia
Tel: 34 972 218 797
http://www.steema.com
Image Image Image Image Image Image
Instructions - How to post in this forum

Post Reply